Step 2. Mount Yoyocam - YOYOMOTION YOYOCam User Manual

STEP 2. Mount YOYOCam

A mounting bracket is included with YOYOCam
To mount YOYOCam:
1. Mount the bracket on the wall, ceiling or other surface as required.
2. Attach YOYOCam to the threaded tip of the bracket.
3. Screw the round lock-nut towards YOYOCam to secure YOYOCam on the mount.
4. Loosen the locking screw so that the angle can be adjusted.
5. Tighten the screw to fix YOYOCam in the desired position.
Note: There is a second mount position on the underside of YOYOCam. The mount screw-threads
are standard photographic size, so YOYOCam can, for example, be mounted on a camera tripod.
For best results:

Avoid pointing YOYOCam at bright lights or windows.

Position high up so that the camera is angled at least 30 degrees downwards.

Position in a location where there is adequate GSM signal strength.

Make test shots (e.g. using command #03#) to check image quality. Adjust angle and/or
position of YOYOCam until images are optimal.

Check that the infrared body detection and/or camera movement detection is working.
Threaded tip
Round lock nut
Locking screw
Fixing hole
13