Table of Contents
Advertisement
Part 1 Caring for your Wisper bike and checks
Although your Wisper bike has been thoroughly tested prior to delivery, it is very
important that you check the bike thoroughly before its first use. Equally important are
frequent and regular spot checks they will protect you and your Wisper bike.
Please read this manual carefully. Only on full understanding of all the functions of this
electric bicycle should you attempt to use it.
Your Wisper bike has been transported in a strong seven layers corrugated carton, to
save space it has been delivered with the front wheel, handlebars, seat post and seat,
and pedals ready for assembly with the tool kit provided.
Your retailer may have assembled your bike for you if not you will find fitting
instructionson the Wisper website
1 Before you set off for the first time
1.1
Check the handle bars and handle bar stem are properly tightened
1.2
Check all other nuts and bolts and fixings are properly tightened, pay particular
attention to the motor fixings, side kick stand, yoke and steering head bearings
1.3
Check brakes and brake isolators are functioning properly
1.4
Check tyre pressures are correct and tyres are not damaged
1.5
Check reflectors and lights if fitted are functioning properly
1.6
Make sure battery is fully charged
1.7
Load battery into bicycle and turn on with key
1.8
Press
on/off
level
selected
www.wisperbikes.com
switch to check the
battery capacity
on
the
left
- 4 -
and the
hand
side
of
the
power assistance
handle
bars.
Advertisement
Table of Contents
