Before You Set Off For The First Time - Wisper 929 Torque 2016 Owner's Manual

2.1. Before you set off for the first time

2.1.1 Check the handlebars and handlebar stem are properly tightened.
2.1.2 Check all other nuts, bolts and fixings are properly tightened.
2.1.3 Check brakes are functioning properly.
2.1.4 Check tyre pressures are correct and tyres are not damaged.
2.1.5 Check reflectors and lights if fitted, are functioning properly.
2.1.6 Make sure the battery is fully charged.
2.1.7 Load the battery into bicycle and turn on with the switch located at the top left
hand side of the battery. (To remove the battery turn the battery key and hinge the
battery out to the
2.1.8 Turn on the bike by pressing the on/off switch by the left hand grip for two
seconds. (Turn off the bike by repeating the same process).
The bike will be ready to ride and the LCD will activate showing battery state,
assist level, time, trip and speed. Exerting pressure on the pedals or twisting the
throttle will now activate the motor.
right.)
7