Table of Contents
Advertisement
2 Part 1 - Caring for your Wisper bike and pre-use checks
Your Wisper bike has been thoroughly tested at the factory prior to delivery, and undergone a pre-
delivery inspection as detailed in the table in appendix 1 of this manual. Please ensure the table has
been completed by your Wisper dealer.
It is very important that you check the bike thoroughly before its first use. Equally important are
frequent and regular spot-checks, as they will protect you and your Wisper bike. The bike must be
returned to the supplying dealer after approximately 300 miles/500km have been completed for a
second safety inspection, as detailed in appendix 1.
Please read this manual carefully. Only on full understanding all of the functions of this electric
bicycle should you attempt to use it.
2.1 Before you set off for the first time
2.1.1
Check the handlebars and handlebar stem are properly tightened.
2.1.2
Check all other nuts, bolts and fixings are properly tightened, paying particular attention to
the motor fixings, side kickstand, yoke and steering head bearings.
2.1.3
Check brakes and brake isolators are functioning properly.
2.1.4
Check tyre pressures are correct and tyres are not damaged.
2.1.5
Check reflectors and lights if fitted, are functioning properly.
2.1.6
Make sure the battery is fully charged.
2.1.7
Load the battery into bicycle and turn on with the key.
2.1.8
Press the on / off switch once on the LED display unit, on the left hand side of the handle
bars. Check the power assist and capacity level indicator lamps are illuminated.
4
Advertisement
Table of Contents
