Table of Contents
Advertisement
Part 1 Caring for your Wisper bike and checks
Although your Wisper bike has been thoroughly tested prior to delivery, it is very important
that you check the bike again before its first use. Equally important are frequent and regular
spot checks, they will protect you and your Wisper bike.
Please read this manual carefully. Only on full understanding of all the functions of this
electric bicycle should you attempt to use it.
Your Wisper bike has been transported in a strong seven-layered corrugated carton. To save
space it has been delivered with the handlebar stem, seat post seat, and pedals ready for
assembly with the tool kit provided.
Your retailer may have assembled your bike for you if not you will find fitting instructions on
the Wisper website
www.wisperbikes.com
1 Before you set off for the first time
1.1
Check the handle bars and handle bar stem are properly tightened
1.2
Check all other nuts and bolts and fixings are properly tightened, pay particular
attention to the motor fixings, side kick stand, yoke and steering head bearings
1.3
Check brakes and brake isolators are functioning properly
1.4
Check tyre pressures are correct and tyres are not damaged
1.5
Check reflectors and lights if fitted are functioning properly
1.6
Make sure battery is fully charged
1.7
Load battery into your bicycle's rear carrier and turn on the power ON/OFF button.
Lock the battery into the rear carrier to ensure the battery's output connection is
always connected properly.
1.8
Check the
power indicator lamps
illuminated on the left hand side of the
handle bars if they do not illuminate
press the
on / off
1.9
To avoid dangerous unplanned
acceleration, always make sure that the
electrical system is turned off and the
power indicator lamps
illuminated when mounting, dismounting
are
switch once
are not
- 5 -
or
Advertisement
Table of Contents
