Before You Set Off For The First Time - Wisper 806 Alpino Owner's Manual

Part 1 Caring for your Wisper bike and checks
Although your Wisper bike has been thoroughly tested prior to delivery, it is very
important that you check the bike again before its first use. Equally important are
frequent and regular spot checks, they will protect you and your Wisper bike.
Please read this manual carefully. Only on full understanding of all the functions of this
electric bicycle should you attempt to use it.
Your Wisper bike has been transported in a strong seven-layered corrugated carton. To
save space it has been delivered with the handlebar stem, seat post seat, and pedals
ready for assembly with the tool kit provided.
Your retailer may have assembled your bike for you if not you will find fitting instructions
on the Wisper website

1 Before you set off for the first time

1.1 Check the handle bars and handle bar stem are properly tightened
1.2 Check all other nuts and bolts and fixings are properly tightened, pay particular
attention to the motor fixings, side kick stand, yoke and steering head bearings
1.3 Check brakes and brake isolators are functioning properly
1.4 Check tyre pressures are correct and tyres are not damaged
1.5 Check reflectors and lights if fitted are functioning properly
1.6 Make sure battery is fully charged
1.7 Load battery into your bicycle's rear carrier and turn on the power ON/OFF
button on the battery. Lock the battery into the rear carrier to ensure the
battery's output connection is always connected properly. Remove the key.
1.8 Press on/off
power assistance level
Note: the set and on/off function are incorporated into one large button.
1.9 To avoid dangerous unplanned acceleration, always make sure that the
www.wisperbikes.com
switch on the LCD display to check the
selected on the left hand side of the handle bars.
- 4 -
battery capacity and the