Table of Contents
Advertisement
16
The front connection box
16.1
The front connection box allows for the easy removal for repair
or replacement of any of the electronic components on the
handle bars. Please ensure no wires are trapped between the two
halves when reassembling and do not over tighten the 4 screws.
17
Quick release saddle height adjustment
17.1
Your Wisper bike has been fitted with a quick release saddle post collar to
facilitate the movement of the saddle to remove the battery or to change the
riding position. Always ensure the collar is fully engaged on the seat tube.
17.2
It is important that the nut on the collar is tightened so the post will be gripped
in the bike tube firmly. Make this adjustment with the quick release lever in the
open position.
17.3
Adjust the seat to the correct height and close the lever. When you sit on the
saddle there should be no vertical movement at all in the saddle post.
IMPORTANT never raise the saddle past the point where the maximum marks on the
saddle post are visible above the quick release collar
18
Rims and spokes
18.1
It is essential to have your spokes checked and tightened after 300 miles. This is
a free service provided by your supplier. If this service has not been undertaken
at the correct time this may cause damage to the wheels and spokes that will
not covered under our guarantee.
19
Chain and drive wheel
20.1
The chain and drive wheel are made from rust proof materials.
20.2
Lightly oil with bicycle chain oil at least once a month.
20
Gear hub
21.1
Your Wisper bike with the premium quality 8 speed SHIMANO Alfine gear box.
You can adjust it by the rapid fire shift lever even when the bike is stationary.
Under normal conditions no maintenance is required.
- 17 -
Advertisement
Table of Contents
