Before You Set Off For The First Time - Wisper 705se Owner's Manual

Part 1 Caring for your Wisper bike and checks
Although your Wisper bike has been thoroughly tested prior to delivery, it is very
important that you check the bike thoroughly before its first use. Equally important are
frequent and regular spot checks they will protect you and your Wisper bike.
Please read this manual carefully. Only on full understanding of all the functions of this
electric bicycle should you attempt to use it.
Your Wisper bike has been transported in a strong seven-layered corrugated carton. To
save space it has been delivered with the front wheel, handlebars, seat post and seat,
rear rack and pedals ready for assembly with the tool kit provided.
* Rack not supplied on 705 eco model
** Your retailer may have assembled your bike for you if not you will find fitting
instructions on the Wisper website

1 Before you set off for the first time

1.1 Check the handle bars and handle bar stem are properly tightened
1.2 Check all other nuts and bolts and fixings are properly tightened, pay particular
attention to the motor fixings, side kick stand, yoke and steering head bearings
1.3 Check brakes and brake isolators are functioning properly
1.4 Check tyre pressures are correct and tyres are not damaged
1.5 Check reflectors and lights if fitted are functioning properly
1.6 Make sure battery is fully charged
1.7 Load battery into bicycle and turn on with key
1.8 Check the power and capacity indicator lamps
unit on the left hand side of the handle bars. If they do not illuminate press the
on / off switch once
1.9 To avoid dangerous unplanned acceleration, always make sure that the
www.wisperbikes.com
are illuminated on the display
- 4 -