Table of Contents
Advertisement
10.3.4 How to read the single trip riding time. Press the "set" button three
times; you will see a clock
This display does not provide the time of day – simply elapsed riding
time since last reset.
11
The LIGHTS
11.1
The front light is an automatic sensor light.
When you turn the power on, it checks the
brightness of the surroundings. It will light
when you ride the bike in low light conditions.
It will turn off after 30 seconds when the
ambient light increases.
11.2
The rear light is also automatic. The sensor
point is from front light.
12
Pedelec mode and ASSIST
mode
12.1
When you first ride your 906Alpino you will notice that after one turn of the
pedals the motor will start working assisting you ride the bike by adding power
to the front wheel. This is the standard or pedelec mode, to continue using the
pedelec mode you must keep turning the pedals, if you stop the motor will stop
and the bike will slow to a halt. If you start pedaling again after one turn the
motor will start again.
12.2
You will find the ASSIST level shows on the LCD display. You can adjust the
assistance strength by pressing the up or down arrow. There are 6 levels of
40%/50%/60%/70%/90%/100%）
assistance（
12.3
70%, 90% and 100% mode are generally used when you need a greater amount
of assistance from the motor. 60% mode is used when you do not need the
instant power of 90% or 100%. 40% and 50% are used in high traffic situations
or poor conditions such as ice and snow when 70%, 90% and 100% power
immediately could be dangerous.
12.4
Power consumption. When you increase the assistance, you will find the battery
range is reduced
13
Throttle
13.1
The throttle can be used independently to the pedelec mode but the operation
will vary depending on the country where the bike is supplied. Bikes are set up
to be legal in the region in which they are supplied and will either provide full
power (100%) or power up to 4 mph (6kph) (walkalong mode) independently of
symbol in the left side of the screen.
.
- 12 -
Advertisement
Table of Contents
