Installation; Installation Overview - Extron electronics DVI DA Plus Series User Manual

Installation

This section describes:
•
•

Installation Overview

All three distribution amplifiers can be mounted on tabletops, under furniture, and in racks
by following these steps:
1.
2.
3.
4.
5.
6.
7.
Installation Overview
Rear Panel Features
Ensure that the input sources, the distribution amplifier and the output displays are all
turned off and all power sources and signal cables are disconnected.
Mount the unit as described in
(see "Rear Panel Features" on page
Connect the cables
If required, configure the internal DIP switches to
certain outputs or to activate the
Plug in the power supply (see page 4).
Turn on the display devices.
Turn on the input devices (see "Operation" on page 7).
"Mounting" on page 15.
disable EDID
EDID Lock mode (see page 10).
DVI DA Plus Series • Installation
4).
(see page 8) from
3