IBM x Series 200 Hardware Maintenance Manual page 33

Error code
(hex)
0x16 Explanation: Single adapter found, but multiple instances tried to load.
Action: Using the Configuration/Setup Utility program, make sure that
Ethernet is enabled, and that the slot containing the IBM xSeries 200 10/100
Ethernet Adapter or the IBM 10/100 Etherjet PCI adapter is enabled.
0x17 Explanation: Slot parameter not specified in the registry.
Action: Remove the adapter driver and reinstall it. If the problem persists,
call for service.
All other 4- Action: Call for service.
character
hexadecimal
codes
Table 5. NDIS (Windows NT or Windows 2000) driver messages for the Ethernet
controller.
Description
25
Diagnostics