Floppy Disk Drive - IBM x Series 200 Hardware Maintenance Manual

Ibm computer drive hardware maintenance manual
Table of Contents

Advertisement

Floppy disk drive

To remove the CD-ROM drive, do the following:
1.
Power-off the server, if it is on.
2.
Unplug the server.
3.
Remove the cover (see "Removing the side cover" on page 40).
4.
Disconnect the cables.
5.
Remove the screws from the CD-ROM drive cage.
6.
Gently slide the CD-ROM drive toward the front of the server and lift it out.
Before you begin:
Read "Safety information" on page 105.
Review the information in "Before you begin" on page 38.
To remove the floppy disk drive, do the following:
1.
Power-off the server, if it is on.
2.
Unplug the server.
3.
Remove the cover (see "Removing the side cover" on page 40).
4.
Disconnect the cables.
5.
Remove the screws from the floppy disk drive cage.
FRU information (service only)
77

Advertisement

Table of Contents
loading

Table of Contents