IBM x Series 200 Hardware Maintenance Manual page 35

Event ID Type
01 Error
02 Error
03 Error
04 Error
Error
05
Informational
06
07 Informational
08 Informational
09 Informational
10 Warning
11 Informational
12 Warning
13 Informational
14 Informational
15 Error
16 Informational
Table 6. NDIS (Windows NT or Windows 2000) driver teaming messages for the
Ethernet controller.
Description
Explanation: Team name and physical adapter name are
the same. This is an invalid configuration.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
Explanation: Unable to allocate required resources.
Action: Free some memory resources and restart.
Explanation: Unable to read required registry parameters.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
Explanation: Unable to bind to physical adapter.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
Explanation: Unable to initialize an adapter team.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
Explanation: Team nn. Primary adapter is initialized.
Action: None.
Explanation: Team nn. Secondary adapter is initialized.
Action: None.
Explanation: Team nn. Virtual adapter or Team is
initialized.
Action: None.
Explanation: Team nn. Primary adapter is switching over.
Action: None.
Explanation: Team nn. Adapter link down.
Action: Make sure the adapter is functioning properly.
Explanation: Team nn. Secondary adapter took over.
Action: None.
Explanation: Team nn. Secondary adapter is deactivated
from the Team.
Action: Make sure the secondary adapter is functioning
properly and that the adapter cable is securely connected to
the LAN.
Explanation: Team nn. Secondary adapter has rejoined the
Team.
Action: None.
Explanation: Team nn. Secondary adapter link is up.
Action: None.
Explanation: Team nn. The last adapter has lost its link.
Network connection has been lost.
Action: Shut down the server and replace the adapters;
then, restart the server to reestablish the connection.
Explanation: Team nn. An adapter has reestablished the
link. Network connection has been restored.
Action: None.
27
Diagnostics