Top/Side Cover - IBM x Series 200 Hardware Maintenance Manual

Ibm computer drive hardware maintenance manual
Table of Contents

Advertisement

Top/side cover

80
Hardware Maintenance Manual: xSeries 200
To remove the bezel release latch, do the following:
1.
Power-off the server, if it is on.
2.
Unplug the server.
3.
Remove the cover (see "Removing the side cover" on page 40).
4.
Remove the front bezel (see "Removing the bezel" on page 41).
5.
Remove the handle assembly (see "Handle assembly" on page 81).
6.
Remove the top/side cover (see "Top/side cover").
7.
Press down on the tab.
8.
From the underside, grasp the bezel release latch in the center and gently pull it
back and away from the server.
Before you begin:
Read "Safety information" on page 105.
Review the information in "Before you begin" on page 38.

Advertisement

Table of Contents
loading

Table of Contents