Setting / Calling A Patrol - HIKVISION Network Speed Dome Camera User Manual

User Manual of Network Speed Dome
Note: The following presets are predefined with special commands. You can only call
them but not configure them. For instance, preset 99 is the "Start auto scan". If you
call the preset 99, the speed dome starts auto scan function.
Special
Preset
33 Auto flip
34 Back to initial position
35 Call patrol 1
36 Call patrol 2
37 Call patrol 3
38 Call patrol 4
39 IR cut filter in
40 IR cut filter out
41 Call pattern 1
42 Call pattern 2
43 Call pattern 3
44 Call pattern 4
92 Start to set limit stops

4.5.3 Setting / Calling a Patrol

Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 4-6 Calling a Preset
Table 4-3 Special Presets
Function Special Function
Preset
93 Set limit stops manually
94 Remote reboot
95 Call OSD menu
96 Stop a scan
97 Start random scan
98 Start frame scan
99 Start auto scan
100 Start tilt scan
101 Start panorama scan
102 Call patrol 5
103 Call patrol 6
104 Call patrol 7
105 Call patrol 8
30