HIKVISION Network Speed Dome Camera User Manual page 32

User Manual of Network Speed Dome
Please make sure that the presets you want to add into a patrol have been defined.
 Setting a Patrol:
Steps:
1. In the PTZ control panel, click
2. Select a patrol number from
3. Click to enter the adding interface of preset as shown in Figure 4-7.
4. Configure the preset number, patrol time and patrol speed.
Name
Patrol Time
Patrol Speed
5. Click to save a preset into the patrol.
6. Repeat the steps from 3 to 5 to add more presets.
7. Click to save all the patrol settings.
 Calling a Patrol:
In the PTZ control panel, select a defined patrol from
to call the patrol as shown in Figure 4-8.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 4-7 Adding Presets
Description
It is the duration staying on one patrol point. The speed
dome moves to another patrol point after the patrol time.
It is the speed of moving from one preset to another.
to enter the patrol settings interface.
.
31
and click