Configuring Alarm Output - HIKVISION Network Speed Dome Camera User Manual

User Manual of Network Speed Dome
8. Click

6.6.4 Configuring Alarm Output

Steps:
1. Enter the Alarm Output Settings interface:
Configuration>Advanced Configuration> Events > Alarm Output
2. Select one alarm output channel in the Alarm Output drop-down list.
3. Set a name in
alarm output (optional).
4. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
Manual. The delay time refers to the time duration that the alarm output
remains in effect after alarm occurs.
5. Click
configuration is the same as the settings of the arming schedule for motion
detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in
Section 6.6.1 Configuring Motion Detection.
6. You can copy the settings to other alarm outputs.
7. Click
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to save the settings.
Figure 6-36 Linkage Method
to enter the Edit Schedule Time interface. The time schedule
to save the settings.
69
for the