HIKVISION Network Speed Dome Camera User Manual page 47

User Manual of Network Speed Dome
network, NTP software can be used to establish a NTP server for time
synchronization.
 Configuring Time Synchronization Manually
(1) Check the Manual Time Sync checkbox.
(2) Click to set the system time from the pop-up calendar.
(3) Click
Note: You can also check the Sync with local time checkbox to synchronize the time
of the speed dome with the time of your computer.
 Select the Time Zone
Purpose:
When the speed dome is taken to another time zone, you can use the Time Zone
function to adjust the time. The time will be adjusted according to the original
time and the time difference between the two time zones.
From the Time Zone drop-down menu as shown in Figure 6-5, select the Time
Zone in which the speed dome locates.
 Configuring Daylight Saving Time (summer time)
Purpose:
If there is the habit of adjusting clocks forward in your country in certain time
period of a year, you can turn this function on. The time will be adjusted
automatically when the Daylight Saving Time(DST) comes.
Steps:
(1) Check
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to save the settings.
Figure 6-4 Time Sync Manually
Figure 6-5 Time Zone Settings
to enable the DST function.
46