Setting / Calling A Preset - HIKVISION Network Speed Dome Camera User Manual

User Manual of Network Speed Dome

4.5.2 Setting / Calling a Preset

Purpose:
A preset is a predefined image position. For the defined preset, you can click the
calling button to quickly view the desired image position.
 Setting a Preset:
Steps:
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click
Note: You can configure up to 256 presets.
 Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
preset.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 4-5 Setting a Preset
to delete the preset.
29
to call the