Wall Mounting The Telephone - Regency 400 Series User Manual

User's Guide

Wall Mounting the Telephone

1 First, remove the clip provided in the set
by sliding it straight up (Figure 1) , and
replace with the Wall Mount Clip found in
the packaging, as shown (Figures 2-3).
2 Replace the desk mount wedge with the
wall mount wedge. To remove the desk
mount wedge, press the two release tabs
as shown. The wedge will snap off. Insert
the tabs of the wall mount wedge (Figure
4) and snap into place.
3 Insert the short line cord into the jack at the rear of the
telephone. Plug the opposite end into the jack on wall.
Figure 1
9
Wall Mounting the Telephone
Figure 2
Regency™ Series 400 Single Line Caller ID Telephone
Figure 4
Wall Mount Clip
Figure 3