Table of Contents
Advertisement
User's Guide
Can I go straight to a
certain number/name
in my directory without
scrolling?
Display is blank.
Display is faint or hard
to read.
How do I clear or delete
only one memory
location?
How do I stop the
TouchLite® from flashing
when there are no
messages in the mail
box?
Messages cannot be
accessed by pressing
TouchLite®.
Must I program the area
code?
No sound on the
receiver on a brand
new phone.
Receiver won't stay
hung up when the set is
wall mounted.
Why do I have to use the
Regency power
adapter?
Regency™ Series 400 Single Line Caller ID Telephone
Trouble Shooting Tips for Regency 400 and 500
No, you have to scroll through the list to reach the
number you want to dial. You can scroll quickly through
by holding down the "Up" button or the "Down"
button.
Check the power cord. Ensure that you are using the
power supply that was provided with the Regency
telephone.
With the receiver "on hook" adjust contrast using the
volume control button.
You must overwrite a memory location once you have
stored something into that location. You cannot
individually erase a memory location.
While the receiver is "on hook" hold the * key down for
3 seconds.
First, ensure that the TouchLite® is programmed
correctly for easy access. See page 16. Also, please
note the TouchLite® will not operate if the telephone
has been programmed to dial in Pulse. Ensure that the
telephone is programmed for Tone dialing
(see page 10)
If your local telephone company does not deliver the
area code with a local number's caller ID information,
it is not necessary to program this feature.
Ensure that the curly cord is connected into the correct
jack on the left side of the telephone as shown on
page 4.
Install wall mount clip provided in the package as
shown on page 9. Also, IT IS IMPORTANT when you
place the receiver into the cradle, do so by placing
the top of the receiver into place first.
All phones should be used ONLY with the power
adapter supplied with that telephone. Using another
power adapter will cause internal damage to the set.
40
Advertisement
Table of Contents
