Automatic Time And Date Setting; Manually Setting Time And Date - Regency 400 Series User Manual

User's Guide

Automatic Time and Date Setting

The date and time are programmed automatically by the 1st
incoming call if the user subscribes to Caller ID service. Each
incoming call refreshes the date and time. Between calls, the
date and time are maintained internally by the telephone unit.

Manually Setting Time and Date

Press the DIRECTORY / STORE key until
the LCD displays: SET UP MONTH 01.
Using the keypad, enter the two-digit
number of the current month (01-12).
For example, 09 for September.
1 Press the DIRECTORY / STORE key
again to store the month. The LCD
will then display SET UP DAY 01.
Enter the two-digit number of the
current date (01-31). For example,
09 for the ninth day in the month.
2 Press the DIRECTORY / STORE key
again to store the day. The LCD
screen will then display AM=1
PM=2.
3 Press 1 for AM or 2 for PM.
4 Press the DIRECTORY / STORE key
again until the LCD displays: SET UP
HOUR 01, then enter the current
hour (01-12).
5 Press the DIRECTORY / STORE key
to store the hour. The LCD screen will then display SET UP MINUTE 00.
6 Enter the two-digit number of the current minutes(s) (00-59), press the
DIRECTORY / STORE key to store the minute.
11
Programming The Telephone
Regency™ Series 400 Single Line Caller ID Telephone