Table of Contents
Advertisement
User's Guide
Speed Dial
There are 10 speed dial name and number memory locations.
Each location can store up to 32 digits.
Read these notes before beginning the programming process:
Note 1:
Speed Dial programming must be done with the line
cord connected and the telephone power adapter
fully installed.
Note 2:
Programming should be performed with the telephone
on-hook (hung up).
Note 3:
There are two different methods for entering a name
and number into speed dial memory:
1. Manual Entry – Uses the dial keypad to enter names
and numbers into memory.
2. Direct Entry – Takes caller log information and saves it
into a speed dial memory location.
Note 4:
Numbers displayed from the caller log can be edited
for dialing purposes.
19
Programming The Telephone
Regency™ Series 400 Single Line Caller ID Telephone
Advertisement
Table of Contents
