Wall Mounting The Telephone - Regency 500 Series User Manual

User's Guide
Using the Features and Options
Placing a Call from Speed Dial Location:
1 Lift the handset or press the speakerphone.
2 Press the DIRECTORY /
STORE key.
3 Press the UP / DOWN
key to locate the
name or number's
memory location (i.e.
MEM1, MEM2, etc.).
The number will be
displayed on the LCD
display.
4 If needed, add (or
delete) any digits to
the number by pressing
the dialing keypad (or
the delete key,
respectively).
5 Press the DIAL key and the number will be dialed.
Regency™ Series 500 Single Line Caller ID Telephone
28
User's Guide

Wall Mounting the Telephone

Wall Mounting the Telephone
1 First, remove the clip provided in the set
by sliding it straight up (Figure 1) , and
replace with the Wall Mount Clip found in
the packaging, as shown (Figures 2-3).
2 Replace the desk mount wedge with the
wall mount wedge. To remove the desk
mount wedge, press the two release tabs
as shown. The wedge will snap off. Insert
the tabs of the wall mount wedge (Figure
4) and snap into place.
3 Insert the short line cord into the jack at the rear of the
telephone. Plug the opposite end into the jack on wall.
Figure 1
Regency™ Series 500 Single Line Caller ID Telephone
Wall Mount Clip
Figure 2 Figure 3
Figure 4
9