Editing The Touchlite Message Retrieval Button - Regency 400 Series User Manual

User's Guide
Editing the TouchLite®
To display the number that has
been programmed into the
TouchLite®, press the TouchLite®
Message Retrieval Button and
read the display. Note: This will
activate dialing.
1 The handset must be on-hook.
2 Press the DIRECTORY / STORE key until the Caller ID displays
VOICE MAIL NO.?.
3 Use the DELETE key to delete
the number. Then, use the
keypad to re-enter the correct
numbering sequence.
4 When the number is correct, press the TouchLite® Message
Retrieval button to store the number.
Note: When editing the voicemail
PIN number or password, the
display will not show the last 4
characters. A dash will be
displayed in the characters position
on the LCD.
Regency™ Series 400 Single Line Caller ID Telephone
Programming The Telephone
18