Table of Contents
Advertisement
User's Guide
Connecting the line cord
1
If the telephone is to be desk mounted, plug one end of the 7'
line cord into the modular jack at the rear of the telephone.
2
The remaining
end of the line
cord plugs into
the jack located
on the wall.
3
If the telephone is
to be wall
mounted, use the
8" line cord supplied instead. See also page 9 for more
information on wall mounting your telephone.
Connecting the power adapter
The power adapter provides the power source to the telephone.
1
Plug the power adapter into the back of the telephone.
2
Wrap the power wire around the strain relief provided . This will
avoid accidental disconnection of the power cord.
3
Plug the power adapter
into a standard 120V
AC power outlet.
Mounting holes are
provided to secure the
power adapter to the
AC wall outlet.
7
Installing the Telephone
Regency™ Series 400 Single Line Caller ID Telephone
Advertisement
Table of Contents
