Reviewing Information In Memory - Regency 400 Series User Manual

User's Guide
4 Press the DIRECTORY / STORE key. The LCD will display a
number along with a memory
location (Figure 2). Use the UP /
DOWN key to change the
memory location to the desired
memory location (Figure 3).
(MEM 1, MEM2, ... MEM10)
5 Press the DIRECTORY / STORE key to store the name and
number.
To program additional numbers,
repeat steps 2 thru 5.

Reviewing information in memory

To review a name and number that is already programmed into
a speed dial location:
1 To select a memory location, press the DIRECTORY / STORE
key. The LCD will display the
following (MEM1: NAME): (Figure
4). Use the UP / DOWN key to find
the desired memory location
(MEM1, MEM2 . . .MEM10)
2 To exit, simply lift the handset,
then hang up.
Programming continued on next page . . .
Regency™ Series 400 Single Line Caller ID Telephone
Programming The Telephone
Figure 2
Figure 3
Figure 4
22