Table of Contents
Advertisement
User's Guide
In Some Areas, The Area Code is Required for a Local Call
In some areas, the local service provider uses the same area
code for local calls. The following options are available for these
areas. Try each of the following scenarios and use the one with
the best result:
1
Program the area code, then place a local test call using the
call back feature.
2
Delete the area code and do not program the access code.
Place a local test call.
3
Program the area code into the access code location. Place
a local test call. (caution: this will always dial the area code)
4
Use the keypad to add any additional number(s) to the
displayed number on the screen. Place a local test call.
Note: Depending on your area and dialing pattern, you may
obtain the best result by using both the access code and area
code fields. If these sequences do not work, use the keypad entry
as an option for your Call Back.
Regency™ Series 400 Single Line Caller ID Telephone
Programming The Telephone
14
Advertisement
Table of Contents
