Maximum Frequency (0.1Hz Increments) (Network Input Config Snvt_Freq_Hz Nciinvmaxfreq); Minimum Frequency (0.1Hz Increments) (Network Input Config Snvt_Freq_Hz Nciinvminfreq) - Mitsubishi Electric FR-A7NL Instruction Manual

NETWORK VARIABLES
6.8.4 Maximum frequency (0.1Hz increments) (network input config
SNVT_freq_hz nciInvMaxFreq)
You can set the maximum frequency to be output by the motor to the inverter in 0.1Hz increments.
Data Name
nciInvMaxFreq
⋅ Data acceptance timing ........... At network variable receive (nv_update_occurs event))
REMARKS
Refer to the inverter manual (applied) for details of Pr. 1 to Pr.18.
6.8.5 Minimum frequency (0.1Hz increments) (network input config
SNVT_freq_hz nciInvMinFreq)
You can set the minimum frequency to be output by the motor to the inverter in 0.1Hz increments.
Data Name
nciInvMinFreq
⋅ Data acceptance timing ........... At network variable receive (nv_update_occurs event)
REMARKS
Refer to the inverter manual (applied) for details of Pr. 2.
74
Initial Value
Initial value of Pr. 1
Initial Value
Initial value of Pr.2
Range Increments
0.0Hz to 400.0Hz
Range
0.0Hz to 120.0Hz
Setting Value
Storage Location
0.1Hz/bit Pr.1/Pr.18
Setting Value
Increments
Storage Location
0.1Hz/bit
Pr.2