Speed Adjustment Default Value (Network Input Config Snvt_Lev_Percent Ncidrvspeedscale) - Mitsubishi Electric FR-A7NL Instruction Manual

NETWORK VARIABLES
6.8.21 Speed adjustment default value (network input config
SNVT_lev_percent nciDrvSpeedScale)
You can set the default value of "speed adjustment (nviDrvSpeedScale) (Refer to page 40).
Data Name
nciDrvSpeedScale
⋅ Data acceptance timing ........... At network variable receive (nv_update_occurs event)
REMARKS
⋅ Write and read the setting value from the network. You can not read and write from the inverter.
⋅ The value stored in the inverter is rounded up. For example, 1.005% is rounded up to 1.010%.
88
Initial Value
100.00% -163.840% to 163.830%
Range Increments
0.005%/bit
Setting Value
Storage Location
