NETWORK VARIABLES
6.3 LONWORKS Object
6.3.1
Setting range of object ID
The setting values of object ID are 0 to 4 and are as listed below.
When any values 5 to 65535 are set for object ID, invalid_id bit of object status (nvoStatus) becomes 1 and
a command set for object request is made invalid. (Refer to page 38)
Object ID
0
Node object
1
VariableSpeedMotorDrive object [LONMARK object]
2
Inverter basic function
3
Inverter PID control function
4
Inverter extended function
36
Description