Firmware Pages and Descriptions
System Settings Page Elements (Cont.)
Master Connection (Cont.):
System Number
Master IP/URL
Master Port Number
Username/Password
Refer to the Step 2: Choose a Master Connection Mode Setting section on page 69 for more detailed
information on using the System Settings page.
132
Allows you to enter a system number. Default value is 0 (zero).
(ETHERNET Only - disabled when USB is selected)
Sets the Master IP or URL of the NetLinx Master.
(ETHERNET Only - disabled when USB is selected)
Allows you to enter the port number used with the NetLinx Master.
• Default value is 1319. (ETHERNET Only - disabled when USB is selected)
If the target Master has been previously secured, enter the alpha-numeric string
(into each field) assigned to a pre-configured user profile on the Master.
This profile should have the pre-defined level of access/configuration rights.
7" Modero Touch Panels