Table of Contents
Advertisement
Firmware Pages and Descriptions
It is important to note which certificate types are supported by the different certificate fields used on the
configuration screens (PEAP, TTLS, and TLS). The following table outlines the firmware fields and their
supported certificate types.
Certificate Types Supported by the Modero Firmware
Configuration Field Name
Certificate Authority field
Client Certificate field
Private Key field
System Settings Page
The System Settings page (FIG. 111) sets the Secondary DNS Address information with its
corresponding IP communication parameters, NetLinx Master communication settings, and reads the
device number assigned to the Modero panel.
FIG. 111
System Settings page showing default values (reads and assigns values to the panel and Master)
The elements of the System Settings page are described in the table below:
System Settings Page Elements
Back:
Connection Status icon:
130
Certificate File Type Supported
PEM and DER
PEM and DER
.PEM, DER, and PKCS12
Saves the changes and returns you to the previously active touch panel page.
This visual display of the connection status allows the user to have a current
visual update of the panel's connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
IP Settings section
Master Connection section
(NetLinx Master properties)
Master Connection features do not take
effect until the panel is rebooted
Red
fields are user-editable
Blue
fields cycle through choices
Grey
fields are read-only
7" Modero Touch Panels
Advertisement
Table of Contents
