Table of Contents
Advertisement
Introduction
Key features common to both panels include:
FIG. 2
NXT-CV7 and NXD-CV7 (front views)
The Button Trim Ring is factory installed only on the FG2259-02 and FG2259-03
panel models.
2
CV7 panels are based on the latest display technology and support AMX's 4th generation (G4)
graphics which provide higher brightness, richer colors, and deeper contrast. The new G4 graphics
technology is supported by the latest AMX TPDesign4 Touch Panel Design program (version 2.6
or higher).
CV7 panels display eye-catching images and full-motion video on a large 16:9 image format, while
providing a wide 100-degree top-to-bottom viewing angle.
CV7 panels feature a front panel light sensor, motion sensor, IR receiver and a Sleep/Setup Access
combo button.
CV7 panels are field upgradeable to 802.11g communication via the installation of the new
NXA-WC8011GCF Wi-Fi Card Kit (FG2255-07).
CV7 panels support AMX Computer Control, which enables remote viewing and control of any
networked computer directly from the panel. This gives the user the ability to launch digital music
from a PC, cruise the Internet, check and respond to E-mail, open software files, and launch
applications. Anything you can do on your PC can be accomplished through these panels.
The optional wireless solution includes an NXA-WC80211GCF internal Wi-Fi card that allows the
CV7 to communicate with a NetLinx Master via a standard 802.11g Wireless Access Point, and an
NXA-BASE/1 battery base kit that allows the NXT to function off the charge from the included
single NXT-BP battery.
CV7 panels feature programmable firmware that can be upgraded via either the Ethernet port,
wireless interface card, or the mini-USB port.
NXT-CV7
Sleep/Setup Access Button
NXD-CV7 (shown with Button Trim Ring installed)
base
Programmable
Buttons/LEDs
(1-3)
Sleep/Setup Access Button
Programmable
Buttons/LED
(4-6)
7" Modero Touch Panels
Advertisement
Table of Contents
