Trouble Shooting - Emerson CAMDEN CF3600AP Owner's Manual

BP7384 Camden, CF3600
WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX
!
OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.
TROUBLE
1. Fan will not
start.
2. Fan sounds
noisy.
3. Fan wobbles
excessively.
3/12/09 12:37 PM Page 14

Trouble Shooting

PROBABLE CAUSE
1. Fuse or circuit breaker
blown.
2. Loose power line
connections to the fan.
3. Fan/Light Wall Control is OFF.
1. Blades not attached to fan.
2. Screws securing fan blades
to motor are loose.
3. Loose screws in motor housing. 3. Check to make sure all screws
1. Setscrew in the hanger ball/
downrod assembly is loose.
2. Screws securing fan blades
to motor are loose.
3. Fan blades are not seated
properly.
4. Hanger bracket and/or ceiling
outlet box is not securely
fastened.
5. Fan blades out of balance.
14
SUGGESTED REMEDY
1. Check main and branch
circuit fuses or circuit breakers.
WARNING: Make sure
!
main power is turned off.
2. Check line power connections
to fan.
3. Turn ON Fan/Light Wall Control.
1. Attach blades to fan before
operating.
2. Check to make sure the screws
which attach the blades to the
motor are tight.
WARNING: Make sure main
!
power is turned off.
in motor housing are snug
(not over-tight)
1. Tighten the setscrew in the
hanger ball/downrod assembly.
2. Check to be sure screws which
attach the fan blade to the
motor are tight.
3. Check to be sure that the
screws securing the fan
blades seat firmly.
4. Tighten the hanger bracket
screws to the outlet box, and/or
secure outlet box.
5. Interchanging an adjacent (side
by-side) blade pair can
redistribute the weight and result
in smoother operation.
Model No.: CF3600