Emerson CF370BS00 Owner's Manual
  1. Manuals
  2. Brands
  3. Emerson Manuals
  4. Fan
  5. CF370BS00
  6. Owner's manual
Emerson CF370BS00 Owner's Manual

Emerson CF370BS00 Owner's Manual

52" ceiling fan, brushed steel/graphite/barbeque black/oil rubbed bronze/satin white, net weight: 14.8 lbs.
Hide thumbs Also See for CF370BS00:
Table of Contents

Advertisement

Quick Links

READ AND SAVE THESE INSTRUCTIONS
52" Ceiling Fan Owner's Manual
CF370BS00
Brushed Steel
CF370BQ00
Barbeque Black
Questions, problems, missing parts: Before returning to the store call
Emerson Electric Customer Service - 8 a.m. - 6 p.m., Eastern, Monday-Friday
Part No. F40BP75430000
Revision: 181009
GEODE
Model Numbers
CF370SW00
Satin White
14.8
Net Weight:
1-800-654-3545
www.emersonfans.com
CF370GRT00
Graphite
CF370ORB00
Oil Rubbed Bronze
Lbs.
....
• Español - página 33
• Français - page 65
Form No. BP7543
ETL Model No.: CF370

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CF370BS00 and is the answer not in the manual?

Questions and answers

Related Manuals for Emerson CF370BS00

Summary of Contents for Emerson CF370BS00

  • Page 1 14.8 Net Weight: Lbs. Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service - 8 a.m. - 6 p.m., Eastern, Monday-Friday • Español - página 33 1-800-654-3545 • Français - page 65 Part No. F40BP75430000 Form No.

  • Page 2: Table Of Contents

    UC7067RA, manufactured by Rhine Electric Co., Ltd. off at the fuse box before wiring, and do not operate To avoid fire, shock or injury, do not use an Emerson fan without blades. or any other brand of control not specifically approved for this fan.

  • Page 3: Unpacking Instructions

    Receiver with Hardware by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product 4 Speed Wall Control Transmitter by Emerson Electric Co. could result in personal injury with Hardware or property damage. Fan Blades Open Carton containing the Fan.

  • Page 4: Electrical Requirements

    Existing Light Fixture. wall dimmer switch or control other than the Emerson Electric Fan/Light Wall Control supplied with the fan. WARNING Your New Ceiling Fan will require a Grounded Electrical Turning off wall switch is not sufficient.

  • Page 5: Ceiling Fan Assembly

    3. Ceiling Fan Assembly WARNING To reduce the risk of personal injury, do not bend the blades during installation, balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades. Figure 1 Remove and retain One of the Three #6-32 x 3/8” Truss Head Screws in the Fan Motor Assembly Hub.
  • Page 6 3. Ceiling Fan Assembly (Continued) LOWER HOUSING Position the Lower Housing onto the Fan Motor ROTATE CLOCKWISE ENGAGE THE TWO LOOSENED Assembly Hub. #6-32 x 3/8" TRUSS HEAD SCREWS Rotate the Lower Housing Clockwise to engage the Two loosened #6-32 x 3/8” Truss Head Screws with the Lower Housing Key Slots (Figure 3).
  • Page 7 3. Ceiling Fan Assembly (Continued) GREEN GROUND WIRE Carefully turn the partially assembled Ceiling Fan right side up and place the Fan securely into the packing styrofoam. Careful not to bend the Blades. Remove the Hanger Ball by loosening the Phillips Head 4.5"...
  • Page 8 3. Ceiling Fan Assembly (Continued) HAIRPIN Install the Clevis Pin and secure with the Hairpin Clip CLIP (Figure 8). CLEVIS CLEVIS PIN The Clevis Pin must go through the Holes in the Motor Coupler and Downrod. It is critical that the Clevis Pin HAIRPIN in the Motor Coupler is properly installed and securely CLIP...
  • Page 9 3. Ceiling Fan Assembly (Continued) 3.11 Place the Ceiling Cover over the 4.5” Downrod (Figure 11). Be sure that the Ceiling Cover and the Coupler Cover are both oriented correctly (Figure 11). Figure 11 3.12 Route the Three Motor Wires through the Hanger Ball (Figure 12).

  • Page 10: How To Hang Your Ceiling Fan

    WARNING CEILING The fan must be hung with at least 7’ of clearance from floor to blades (Figure 14). WARNING Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring LEAST must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a...
  • Page 11 Securely attach the Hanger Bracket to the Outlet Box using the Two Screws supplied with the Outlet Box (Figure 16). OUTLET HANGER TWO SCREWS BRACKET SUPPLIED WITH OUTLET BOX ANTI-ROTATION Figure 16 Carefully lift the Fan and seat the Hanger Ball/ Downrod Assembly on the Hanger Bracket that was just attached to the Outlet Box (Figure 17).

  • Page 12: How To Wire Your Ceiling Fan

    All wiring by Emerson Electric Co. could result in personal injury must be in accordance with National and Local codes or property damage.
  • Page 13 5. How to Wire Your Ceiling Fan (Continued) NOTE: Make all wiring connections using the wire connectors supplied in the parts bag and the receiver hardware bag. Make sure that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the supply circuit ground wire.
  • Page 14 5. How to Wire Your Ceiling Fan (Continued) Securely connect the Receiver Black Wire (AC IN L) to the Supply Black Wire (hot) using the 12 ga. Wire Connector (supplied in parts bag) (Figure 21). 12 ga. WIRE CONNECTOR SUPPLY AND RECEIVER BLACK WIRES Figure 21...
  • Page 15 5. How to Wire Your Ceiling Fan (Continued) S e c u r e l y c o n n e c t t h e R e c e i v e r B l a c k W i r e (TO MOTOR L) to the Fan Motor Black Wire using the 18 ga.
  • Page 16 5. How to Wire Your Ceiling Fan (Continued) While inserting the Receiver fully into the Hanger WIRE Bracket, turn Wires upward and carefully push Wires CONNECTORS (Tucked Inside into the Outlet Box, with the White and Green Wires Outlet Box) on one side of the Outlet Box and position the Black and Blue Wires on the other side of the Outlet Box (Figure 25).

  • Page 17: Final Assembly

    Lift the Ceiling Cover up to the Threaded Studs and turn until Studs protrude through the Ceiling Cover Holes (Figure 28). Secure the Ceiling Cover in place by sliding a Lockwasher over each of the Threaded Studs and installing the two Knurled Knobs (supplied) (Figure 28). Tighten the Knurled Knobs securely until the Ceiling Cover fits snugly against the ceiling and the hole in the Ceiling Cover is clear of the Downrod.
  • Page 18 Engage the Fan Motor 2-Pin Wire Connector into the 2-pin Wire Connector of the LED Light Fixture Assembly (Figure 29). The connection is complete when you hear a soft click. FAN MOTOR ASSEMBLY CONNECTOR LED LIGHT FIXTURE ASSEMBLY CONNECTOR FAN MOTOR CONNECTOR LED LIGHT CONNECTOR...
  • Page 19 Carefully tuck all the Wires and Connectors into the Lower Housing. Position the LED Light Fixture Assembly onto the Lower Housing, aligning the Three Holes. NOTE: Verify that the wires and connectors are not trapped between the LED light fixture assembly and the lower housing.

  • Page 20: Wall Control Procedures

    Code Switches in the Transmitter may be set in 32 different positions. If your Fan and Light turn ON and Your Emerson Ceiling Fan/Light Control consists of OFF without using your Control, you may be getting Wall Mounted Transmitter and a Receiver located interference from other remote units such as garage inside the Ceiling Cover.

  • Page 21: Wall Control Installation

    8. Wall Control Installation SINGLE-POLE INSTALLATION WARNING CAUTION: To reduce the risk of electrical shock, Turning off wall switch is not sufficient. To avoid disconnect the electrical supply circuit before possible electrical shock, be sure electricity is turned installing the fan, light kit or receiver. off at the main fuse or circuit breaker box before wiring.
  • Page 22 8. Wall Control Installation (Continued) SCREWS (2) FAN/LIGHT WALL Before installing the Wall Control, place the Wall Control WALL CONTROL in “OFF” mode by pushing “ON/OFF” Switch to the “OFF” position..Connect one Black Wire of the Wall Control to the “HOT”...
  • Page 23 8. Wall Control Installation (Continued) 3-WAY INSTALLATION SECOND (One Fan controlled by two different Wall Controls) FAN/LIGHT WALL WALL ..(See Figures 35 and 36.) CONTROL CONTROL PURCHASED SEPARATELY WARNING BLACK Turning off wall switch is not sufficient. To avoid LOAD TRAVELER possible electrical shock, be sure electricity is turned...
  • Page 24 8. Wall Control Installation (Continued) 3-WAY WIRING DIAGRAM: NEW CONSTRUCTION STANDARD WIRING FOR EXISTING 3-WAY CONTROLS NOTE: Retrofit 3-way installations are likely to include two traveler wires between the two wall boxes. In new construction, only one traveler wire Is required (See Figure 36).

  • Page 25: Programming The Receiver Operating Frequency

    9. Programming the Receiver Operating Frequency PROGRAMMING THE RECEIVER OPERATING FREQUENCY If programming is unsuccessful, retry the previous instructions after cycling the Wall Control ON/OFF Switch to restart the 1 minute programming time period. Turn the Wall Control ON/OFF Switch to the “OFF” position.

  • Page 26: Using Your Ceiling Fan

    Emerson Electric Co. Substitution of parts or • Additional Ceiling Fan Wall Controls accessories not designated for use with this product by Emerson Electric Co. could result in personal injury WARNING or property damage. The use of any other control not specifically approved for this fan could result in fire, shock and personal injury.

  • Page 27: Troubleshooting

    13. Troubleshooting WARNING FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLESHOOTING YOUR FAN. TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or Circuit Breaker blown. 1. Check Main and Branch Circuit Fuses or Circuit Breakers. WARNING Make sure main power is turned OFF.

  • Page 28: Repair Parts

    14. Repair Parts PARTS BAG ..ETL Model No.: CF370...
  • Page 29 14. Repair Parts Listing Part Numbers Model Number Model Number Model Number Model Number Model Number Description CF370BS00 CF370BQ00 CF370GRT00 CF370ORB00 CF370SW00 Hanger Ball Assembly, Consisting of: 761655-17 761655-19 761655-102 761655-32 761655-92 Hanger Bracket (1) — — — — —...

  • Page 30: Energy Efficient Use Of Ceiling Fan

    This produces a gentle updraft, which forces warm install the fan 8 - 9 feet above the floor for optimal air near the ceiling down into the occupied space. airflow. Consult your Emerson Retailer for optional Remember to adjust your thermostat when using your mounting accessories.

  • Page 31: Ceiling Fan Limited Warranty

    What We Will Do To Correct Problems: If the defect is covered by this limited warranty, Emerson will repair or replace the applicable Emerson Ceiling Fan Product at no charge to You. If repair of the Emerson Ceiling Fan Product is not practical or possible within a reasonable time and no replacement Emerson Ceiling Fan Product can be provided, Emerson will refund You the actual purchase price of Your Emerson Ceiling Fan Product.
  • Page 32 You should record this data above and keep it in a safe place for future use. Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m.

This manual is also suitable for:

Cf370bq00Cf370grt00Cf370orb00Cf370sw00

Table of Contents