READ AND SAVE THESE INSTRUCTIONS BATON ROUGE ™ Ceiling Fan Owner's Manual Model Numbers CF3200AWL00 CF3200DBZ00 Summer White Distressed Bronze w/Latte Highlights 26.0 Net Weight: Lbs. Part No. F40BP73500000 Form No. BP7350 U.L. Model No.: CF3200...
Page 2
WARNING: To reduce the risk of fire or electrical shock, this fan should only be used with fan speed control, Model No. SW105, manufactured by Rhine Electric Co., Ltd. WARNING: To avoid fire, shock or injury, do not use an Emerson or any other brand of control not specifically approved for this fan.
Emerson Electric Co. Substitution of parts or If any parts are missing, contact your local accessories not designated for use with this product by Emerson Electric Co. could result in personal retailer or catalog outlet for replacement before injury or property damage.
1. Place the flange assembly onto the bottom of the regulate your ceiling fan speed, airflow direction, blade assembly. Place the flange medallion and light intensity. An optional Emerson Electric assembly into the four holes of the blade SR110 Remote Control may also be used.
Page 5
7. Remove the wire connector from the white wire of NOTE: If installing an optional Emerson light kit, the switch housing plate. Retain for the next step. follow the instructions provided with the light kit. 8. Connect the white wire from the switch housing 12.
Page 6
15. Securely connect the white fan one-pin connector wire to the white one-pin connector wire from the light kit assembly. Connect the yellow fan one-pin connector wire to the yellow light kit assembly LIGHT KIT ASSEMBLY LIGHT KIT one-pin connector wire (Figure 8). SCREW (3) ASSEMBLY NOTCHED...
Page 7
25. Slide the motor cover over the downrod and WARNING rotate the cover until the threaded studs protrude. Install one lockwasher (supplied) and one knurled It is critical that the clevis pin in the motor coupling knob (supplied) onto each threaded stud to is properly installed and the setscrew securely secure the cover to the motor.
28. The blue, black, white, and yellow leads exiting 3. Slide the assembled decorative scroll over the 12” the downrod are 80-inches long. Before installing downrod and position each scroll leg on the the fan, measure up approximately 6 to 9-inches decorative light kit ring (Figure 19).
WARNING WARNING Failure to seat tab in groove could cause damage to To reduce the risk of fire, electric shock, or personal electrical wires and possible shock or fire hazard. injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws supplied with outlet box.
OUTLET BOX BLACK SUPPLY WIRE HANGER BRACKET BLACK FAN WIRE OUTLET BOX HANGER BRACKET BLACK/WHITE RECEIVER WIRE GROUND WIRE (GREEN) BLUE FAN WIRE HANGER HANGER BALL BRACKET GROUND WIRE BLUE RECEIVER (GREEN) WIRE 1-1/4" THREADED OPEN STUDS (2) RECEIVER PORTION OF RECEIVER HERE SUPPLY GROUND...
Page 11
Setting Operating Installation Frequency of Wall Control of Wall Control and Receiver (Figure 27) WARNING Your wall control and receiver have code switches which must be set in one of 16 possible code Turning off wall switch is not sufficient. To avoid combinations.
NOTE: The downlight button will not work unless INDICATOR an Emerson light kit is added to the ceiling fan. LIGHT Your SW116 Fan/Light Wall Control (Figure 30) has SPEED...
Ceiling Fan accessories not designated for use with this product Periodic cleaning of your new ceiling fan is the only by Emerson Electric Co. could result in personal maintenance that is needed. injury or property damage. When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish.
Repair Parts LIGHT FAN OFF 10-32 x 10mm PAN HEAD SCREW (4 Per Blade) FLANGE ASSEMBLY BLADE FLANGE MEDALLION U.L. Model No.: CF3200 U.L. Model No.: CF3200...
You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Air Comfort Ceiling Fan should be properly packed to avoid damage in transit since we will not be responsible for any such damage.