Tadiran Telecom Emerald Quick Start Manual page 49

Emerald ICE Quick Start Guide
a. To program a directory number, press [dir].
b. Enter the appropriate directory number and then press [save]. If you
make a mistake, use [bksp] and [chg] to re-enter the number.
c. To program a feature code, press [pgm].
d. Press the PGM
e. Enter the feature code for example, enter
[save].
5. Continue programming other Feature/DSS Buttons or lift/replace the handset
to exit this programming.
Description (Standard Model)
Emerald ICE Standard Telephones have 14 dual-colored programmable Feature/
DSS Buttons. You can program any system feature code on any Feature/DSS
Button for one-button operation. Certain programmed Feature/DSS Buttons will
light when activated (Do Not Disturb, Call Forward, DSS/BLF, etc.), while others
such as Call Pick-Up, Background Music, Last Number Redial, do not.
Features are separated into two distinct categories for programming onto Flexible
Buttons: Directory Numbers or Feature Codes.
1. While the phone is idle, press
2. Press the Feature/DSS Button that you want to program. When programming,
the red LED of the feature key being programmed will flash slowly until pro-
gramming is completed.
NOTE: To program the button you must know the code number of the fea-
ture.
3. For a Directory Number press
4. For a Feature press
Page 2-38
DIR NUMBER :_
bksp save
PGM CODE:_
bksp
button.
p
PGM
1 + Directory Number+
PGM
2 + p + Feature Code +
chg
save chg
4#
.
p#3
for DND and then press
h .
h .