Page 2
Dear customer, before putting your coffee machine into operation, please read the operating instructions carefully. In this way, you protect yourself and you avoid damages to the device. They contain important information on the correct use of your machine and will enable you to use the coffee machine with the necessary handling.
Extended operating pauses or shut−down of the unit D Before extended shut−down periods, the cleaning program has to be carried out. D In order to avoid frost damages or in case of risk of freezing, the Franke customer service has to empty the unit.
Familiarise yourself with the bremer VIVA Coffee Machine Cover for manual ground coffee metering Cover, bean container and cleaning agent metering (lockable) *Bean container, left *Bean container, right Bean container, center Keypad cover (lockable) *Milk cooling box (add. feature) Hot water button...
2.1 Set the language for the menue − before switching on − in STANDBY Mode !!! STANDBY !!! − at the machine Example: set the language to German . Press the upper article key on the left hand START side continuously, press at the same time till the requested country START code apears in the display panel...
Switch on the unit . Open the water valve. . Switch on the electrical mains switch. !!! STANDBY !!! D !!! STANDBY !!! appears in the display panel. . Unlock and open keypad cover with key. . Switch on the coffee machine by pressing the on−off switch.
Page 9
Cover, beans container Top up coffee beans Lock (option) . Unlock the hopper cover with the key and open it. . Fill the empty hopper with the required type of coffee beans. D If the appliance is equipped with 2 grinders, it will be possible to use two different sorts of coffee beans.
3.2 Provide milk (bremer VIVA with milk frother) Food poisoning by bad milk! If off milk is used, there will be the risk of food poisoning. For hygienic reasons, the milk has to be replaced in time. Off milk has a foul smell and must not be used.
Page 11
When preparing Cappuccino or coffee with milk, milk or milk froth is metered automatically. Filling milk container, see operating instructions bremer VIVA Milk Fridge. For the milk quantity settings, see the Chapter "Adjust metering quantities for article", see page 33.
3.3 Prepare and take coffee Risk of scalding by hot coffee ! After completion of the brewing process, the machine automatically serves hot coffee. CAUTION Deposit and leave the cup during the process. Do not handle below the coffee outlet. NOTE During coffee production do not pull out the coffee ground tank or the coffee outlet (outlet head), as otherwise malfunction might...
D The standard factory setting of the coffee machine is the preparing of single portions, see page 12. D The customer service may adjust the bremer VIVA coffee machine by starting up, so you can set the number of portions, like following example.
3.4 Manual ground coffee metering D This is for preparing single portions only. . Place the cup under the coffee dispenser. . Unlock and open the cover for ground coffee Press here to open Cover for ground chute (1)and keypad (2). coffee chute (1) Lock (option) Keypad cover (2)
D Consider the time of approx. 5 seconds for milkdosage after releasing the key. D After each additional dosage of milk or milk foam, the bremer VIVA automatically rinses the coffee dispenser. Adjust the milk quantity in the Chapter "Adjusting metering quantities for...
3.6 Emptying the grounds container The bremer VIVA coffee machine counts the number of ejected portions of ground coffee. After the set number of portions is reached, the display signals that the grounds container must be emptied. The number of portions can be changed by the Franke bremer Customer Service representative (factory setting 80 to 100 portions).
Take hot water (additional Feature) Risk of scalding by hot water! After pressing the hot water button, the machine automatically dispenses hot water. CAUTION Proceed with care. Place cup under Hot water dispenser wait until operation is finished. Do not handle below the hot water outlet. Hold the hot water outlet pipe at the protective handle (add.
NOTE Depending on the adjustment in the service menu (to be adjusted by the Franke bremer customer service): Steam is distributed as long as you keep the steam button pressed (factory setting) or steam is distributed until steam distribution is disabled by pressing the steam button repeatedly.
Cleaning tablets for coffee machines Cleaning tablets for automatic cleaning of the brewing unit Special Cleaner VIVA KM with milk frother: for cleaning the milk system (add. feature) You can obtain cleaning agents from your Franke Customer Service agent.
6.1 Cleaning the milk system (bremer VIVA with milk frother) NOTE Clean the milk system − for hygiene reasons − at least two times a day − with Special cleaner and hot water − especially prior to longer pauses between milk drawings −...
Page 21
0,6 Liter cold clear water. Go on with cleaning the brewing unit", see page 22. suction bremer VIVA coffee machine with milk coolbox / hose Tetrapack (add. feature) . Place the vessel on the drip tray. . Insert the suction pipe to the vessel.
Start cleaning program . Open the chute cover and keypad cover. . Press the Cleaning Program key bremer VIVA without milk froth : Go on with Cleaning the brewing unit", see Page 23." D The following command appears in the Press + to Clean display if milk metering is adjusted.
Page 23
. After this message press key Press + To Rinse 2 Tube a second time. Instruction for second cleaning cycle (rinsing cycle) D Rinsing runs from approx. 1 minute. An Rinsing Tube instruction appears in the message field. Please wait After the rinsing the milk system is cleaned.
6.3 Cleaning the coffee dispenser − for hygiene reasons − with a cleaning brush − bremer VIVA with milk frother: clean the coffee dispenser several times a day with a special cleaner for milk systems. Pull out the coffee dispenser Risk of scalding! The dispenser block may be hot.
Page 25
Insert all removed parts in a cleaning bath − only bremer VIVA with milk foamer − several times a day − approx. 20 minutes Cover . Proportion cleaning agent special cleaner in a container, push the dispenser 5 times and add approx.
Page 26
Cover . Press the cover into the dispenser block until Dispenser block the stopper is reached (bremer VIVA with milk froth). D If the cover is not closed completely the milk will be heated up too much.
6.4 Deliming and cleaning the hot water / steam outlet (add. feature) − only in case of lime deposits and furring Risk of scalding in case of unintentional hot water outlet! Before decalcifying the hot water outlet, switch off the VIVA KM via the on−off switch CAUTION Screw off the cone and nozzle only if the machine is switched off and...
6.5 Clean coffee bean container and housing . Switch off the VIVA coffee machine − before cleaning − so that the grinder or brewing unit cannot start automatically (avoid risk of crushed fingers) − via the main switch Clean the coffee bean container Note When cleaning the container, ensure that impurities do not enter the coffee bean container or grinder.
D To prevent calcification of the coffee machines, Britta Waterfilters are placed into the water supply of the coffee machines. D Call the Franke customer service if you get a message in the display panel to change the water filter.
Adjustment, programming 8.1 Overview of the adjustment possibilities Ready NOTE: The setting is possible only, if the main menu is not blocked by a secret code. Access to the main menu / Enter a secret code number, see page 38. Access to the submenu Summing counter Coffee cup...
8.2 Display or delete the summing counter All output articles are counted in the summing counter. These totals can be displayed or deleted. Ready Summing counter Coffee cup Total:0000000012 Select the required article by pressing the corresponding article key. Exit menu E.
8.3 Assigning bean container to the article key Ready Select grinder Coffee cup Grinder: centre Select the required article by pressing the correspon- ding article key Exit menu The article "Cup of coffee", related to this key, is used for neutralization after automatic cleaning.
8.4 Adjusting metering quantities for article Ready Coffee cup Ground coff.:245 Select required article by pressing the corresponding article key Adjust dosage quantity E. g. 1 Espresso selected Ground coffee quantity − grinder 1 espresso running time Ground Cof.: 290 Adjustment range: 0 to 999 in 1/100 sec.
8.5 Adjusting the metering quantity hot water" This setting is only effective if the "metered hot water dispensing" is activated. Adjustment to "metered/unmetered hot water dispensing" can be performed by Customer Service. "Metered hot water dispensing" is activated at the factory. Ready Adjust dosage Coffee cup...
8.7 Adjusting article control (multiple selection) The possibility for multiple selection can be switched off and on. If you have switched on multiple selection, you can preselect up to 9 portions during one brewing operation, e.g. for brewing in a pot. The article keys can be assigned to an external billing system.
8.8 Changing to turbo operation" By changing to turbo operation", the waiting time for a brewing cycle isshortened.In this setting, a grinding cycle follows every brewing cycle. The coffeefor the next brewing cycle is then ground already. This function can only be set for one item key. This setting blocks allother item keys.
8.9 Enter a secret code (PIN) to change settings You can block the message- and entry field against unwanted operation by entering a secret code / PIN = personal identification number . The factory setting is 5 zeros. When this code (5 zeros) is entered, themessage- and entry field are not blocked.
8.10 Setting the dispensing sequence VIVA KM with milk frother, VIVA KM au lait and VIVA 24: By means of the dispensing sequence you can for instance decide whethermilk foam or the brewing cycle starts first. Both of these can also run simultaneously. Ready Coffee cup brewing: 1...
The temperature sensor or Switch off the unit. boiler is higher than 135°C. It switched off pressure switch is defect. Call the Franke customer service. itself for safety reasons. 41 LON communication interfered no apb" is indicated − The Franke customer service will only VIVA KM with load the apb−file.
Page 41
Faults with indication text Example: Insert grounds container Indication of failt Possible cause Remedy Insert grounds container It is not inserted into Clean and insert it into the the machine. machine. Dispenser block is missing It is not inserted into the Insert a clean dispenser block into machine.
Page 42
. Close the water valve. . Call the Franke customer service and quote the error message, unit type, machine no. and the year of construction, see page.
10. Technical data Professional coffee maker bremer VIVA KM bremer VIVA KM Number/capacity, bean container 1 − 3 bean containers, depending on configuration left and right approx. 1 kg, centre approx. 1.5 kg, total approx. 3.5 kg Coffee grinders 1 − 3, depending on configuration Capacity, grounds container approx.
11. Setting up and connecting (Customer Service) D Setting up, installation, putting into operation for the first time and instruction are performed by the Franke bremer Customer Service. D On the building site, the connections must be up to 1 m to the installation location.
Page 45
Setting up the bremer VIVA KM /−au lait with Milk Fridge (add. feature) Table opening for supply lines water outlet / waste water supply mains cable connection for equipotenitial bonding system setting up on the left or the right side...
11.2 Remove protection / Inserting beans container D The beans container may be inserted by authorized servicemen only! Keypad cover Lock . Unlock keypad cover with key and open. . Remove 2 screws. . Pull front panel forth to the limit stop (approx.
11.3 Connecting the water supply D Observe the national guidelines for the water connection. D For a water hardness of over 5° dkH (carbonate hardness), we recommend that you have to install a water softener in the water inlet line. Observe the instructions on installing and using the water softener.
D Refer to the data on the rating plate for the electrical connection. Rating plate bremer VIVA KM − 230 V version . Insert the mains plug into a correctly Equipotential bonding system installed grounding outlet (230 V).
Maintenance D Installation, maintenance and repair work may only be carried out by authorised Customer Service representatives. D Have your bremer VIVA coffee machine serviced regularly − after every 60.000 products − at least once per year − by an authorized Franke bremer Customer Service.
− Remove remaining coffee beans from the bean hopper. − Remove coffee grounds from the grounds drawer and clean the drawer. D For safety reasons, the following steps should be carried out by a Franke customer service engineer before disposing of the old machine: −...
Telefon +49 7931 992 0 Franke Coffee Systems Telefax +49 7931 517 00 www.franke−cs.com Franke bremer GmbH Lindenweg 36-42 D-97999 Igersheim EU Conformity Déclaration de confor- EWG-Konformitäts- erklärung declaration mité européenne We hereby declare that the design of Hiermit erklären wir, daß die nachfol- Nous déclarons, par la présente,...