Deliming And Cleaning The Hot Water / Steam Outlet (Add. Feature) - Franke bremer VIVA Operating Instructions Manual

6.4 Deliming and cleaning the hot water / steam
outlet (add. feature)
CAUTION
hot water
dispenser
steam dispenser
cone
hot water nozzle
outlet with
screen and
gasket
− only in case of lime deposits and furring
Risk of scalding in case of unintentional hot water outlet!
Before decalcifying the hot water outlet, switch off the VIVA KM via
the on−off switch
Screw off the cone and nozzle only if the machine is switched off and
cooled.
O-ring
steam
nozle
. Remove clockwise manually
− on the left hand side : cone with hot
water nozzle, outlet with screen, gasket
− on the right hand side : steam nozzle
. Remove these parts manually.
D Use a needle−nosed pliers to remove the hot
water nozzle.
. Except the gasket and O−rings put all
removed parts into a solution with Bremex
and water for approx. 10 minutes.
. After that rinse thorougly with clear water.
. Assemble and screw all parts tightly.
. Clean the hot water and steam dispenser
with a damp cloth. Use hot water and steam
to remove cleaning residues.
27