Prepare And Take Coffee; Preparing Single Portions (Factory Setting) - Franke bremer VIVA Operating Instructions Manual

3.3 Prepare and take coffee

CAUTION
NOTE

3.3.1Preparing single portions (factory setting)

. Place cup under the coffee dispenser.
D The coffee machine is ready for operation when the green indicator lamps on
the buttons light up and when "Ready" is displayed in the display panel.
. Start the required brewing process by pressing the corresponding article key
D The brewing process is displayed in the display panel, e.g.:
Preparation
Coffee cup 1x
D After each withdrawal of a coffee milk product or of milk, the coffee machine
automatically rinses the coffee dispenser.
To change the coffee type and settings, see Page 30, Chapter 8.
12
Risk of scalding by hot coffee !
After completion of the brewing process, the machine automatically
serves hot coffee.
Deposit and leave the cup during the process. Do not handle below
the coffee outlet.
During coffee production do not pull out the coffee ground tank or
the coffee outlet (outlet head), as otherwise malfunction might
result.
Coffee
dispensing
Outlet
rocker
Set the outlet height of the coffee dispenser
To adapt to various vessel sizes:
. To adjust the height of the coffee dispenser,
fold away the outlet rocker or push the coffee
dispenser up or down.
D When using coffee pots fold the outlet rocker
to the rear till stop (engages).
Height max.
185 mm