Set The Number Of Portions − Multiple Selection - Franke bremer VIVA Operating Instructions Manual

3.3.2Set the number of portions − Multiple Selection
D The standard factory setting of the coffee machine is the preparing of single
portions, see page 12.
D The customer service may adjust the bremer VIVA coffee machine by starting up,
so you can set the number of portions, like following example.
Example: Brewing a pot of coffee − 9 cups
Preparation
Coffee cups 9x
Number of portions
Notes for multiple selection
D The first brewing operation begins immediately when the first portion is
selected.
D The display returns to 1" after more than 9" portions are selected.
D An already commenced brewing operation is completed.
D The number of multiple selection should not exceed the number of possible
dosages during the adjusting in that case.
D You can set the "Multiple selection" see Adjusting article control" on page 36,
if the message- and entry field / main menu is not blocked, see page 38.
. Place a lot of empty cups under the coffee
dispenser by time.
. Press the article key
necessary until the required number of
portions is displayed in the display panel, for
example 9 times.
D The number of portions is shown in the
display panel and will be counted down
during operation / preparation.
as often as is
13