Inspire M1 Assembly & Operation Manual page 21

Seat Stem
STEP 25
2 – 1 ½" Hex Bolts
2 – 3/8" Flat Washers
Leg Extension Arm
STEP 26
Assemble Roller Tubes
& Foam Rollers
Step 24: Attach Back Pad to Main Upright using:
Step 25: Attach Seat Pad to Seat Stem using:
Step 26: Slide Roller Tubes into Seat Stem, Leg Extension Arm and Main Upright as shown in
diagram. Next, slide all six Foam Rollers onto Roller Tubes as shown in diagram.
Two (3 ¾" Hex Bolts)
Two (3/8" Flat Washers)
Two (1 ½" Hex Bolts)
Two (3/8" Flat Washers)
Page 18
STEP 24
2 – 3 ¾" Hex Bolts
2 – 3/8" Flat Washers