Inspire M1 Assembly & Operation Manual page 20

STEP 21
1 – Plastic Ball
1 – Cable "U" Bracket
1 – 1 ¼ " Shoulder Bolt
1 – Spring Clip
1 – 5/16" Lock Nut
STEP 23
1 – Plastic Ball
1 – Cable "U" Bracket
1 – 1 ¼ " Shoulder Bolt
1 – Spring Clip
1 – 5/16" Lock Nut
Step 21: Assemble Cable End as done
in step 17 using:
Wrench Tighten Now
Step 22: Route Lower Cable from top to bottom.
NOTE: Make sure cable is routed between pulley 10 and cable retainer pin.
Step 23: Assemble Cable End as done
in step 17 using:
Wrench Tighten Now
Pulley 10
Cable Retainer Pin
One (Plastic Ball)
One (Cable "U" Bracket)
One (1 ¼" Shoulder Bolt)
One (Spring Clip)
One (5/16" Lock Nut)
One (Plastic Ball)
One (Cable "U" Bracket)
One (1 ¼" Shoulder Bolt)
One (Spring Clip)
One (5/16" Lock Nut)
Page 17
STEP 22
Route Lower Cable