Customizing Patrols - HIKVISION DS-7104HWI-SL User Manual

4.2.3 Customizing Patrols

Purpose:
A patrol is a scanning track specified by a group of user-defined key points, with the scanning speed between
two key points and the duration time at each key point separately programmable. The key points are
corresponding to the presets.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Select patrol number.
3. Click under Patrol option box to add key points for the patrol.
4. Configure key point parameters, such as the preset No., duration of staying for one key point and speed
of patrol. The key point is corresponding to the preset. The Preset determines the order at which the
PTZ will follow while cycling through the patrol. The Duration refers to the time span to stay at the
corresponding key point. The Speed defines the speed at which the PTZ will move from one key point
to the next.
5. Click OK to save the key point to the patrol.
Repeat the above steps to add more key points.
You can also click to delete the corresponding key point and click
User Manual of Digital Video Recorder
Figure 4. 6 PTZ- Add Key Point
Figure 4. 7 Key point Configuration
42
to delete all the key points.