Detecting Video Tampering Alarm - HIKVISION ERT-F204 Series User Manual

ERT-F2xxx DVR User Manual

Detecting Video Tampering Alarm

Purpose:
Trigger alarm when the lens is covered and take alarm response action(s).
Go to Menu > Camera > Video Tampering to enter the Video Tampering interface of Camera Management
and select a channel for which you want to detect video tampering.
Set the video tampering handling action of the channel.
1) Check Enable Video Tampering Detection.
2) Drag the sensitivity bar to set a proper sensitivity level. Use the mouse to draw an area you want to
detect video tampering.
3) Click the button to set up handling action of video tampering.
Set arming schedule and alarm response actions of the channel.
1) Click Arming Schedule to set the arming schedule of handling actions.
2) Choose one day of the week (a maximum of eight time periods can be set within each day).
3) Click Apply to save the settings.
Time periods cannot repeat or overlap.
UM ERT-F2xxx 030118NA
Video Tampering Setup Interface
88