Wegener 4600 User's Reference Manual page 60

Unity 4600 User's Manual
RPATH FROM domain
domain:Legal string of keyboard characters in proper domain-name format
(e.g. string1.string2.string3...)
Domain name portion of "from" email address in Return Path reporting. A
Local Control Command (available from the terminal regardless of "Local
Control Enable/Disable" commands from the network).
RPATH RELAY addr
addrIP address formatted as n1:n2:n3:n4 where n1, n2, n3, and n4 are integers
between 0 and 255.
IP address of local Mail Relay server, if any. A Local Control Command
(available from the terminal regardless of "Local Control Enable/Disable"
commands from the network).
RPATH SEND
Command ordering IRD to immediately send a Return Path report. A Local
Control Command (available from the terminal regardless of "Local Control
Enable/Disable" commands from the network).
RPATH TO username@addr
username:Legal string of keyboard characters without white space.
addr:IP address formatted as n1:n2:n3:n4 where n1, n2, n3, and n4 are integers
between 0 and 255.
Email address destination for Return Path reporting. A Local Control Com-
mand (available from the terminal regardless of "Local Control Enable/Dis-
able" commands from the network).
SAVENV
Saves all the current global and Unit Setting NV parameters (in NVRAM) to
the Flash memory space designated as "BACKUP". Note: Some unit-set
parameters, which would not make sense to "back up", may not be saved. A
Local Control Command (available from the terminal regardless of "Local
Control Enable/Disable" commands from the network).
800032-01 Rev. C 60 wegener.com