Wegener 4600 User's Reference Manual page 50

Digital media receiver / decoder
Hide thumbs Also See for 4600:
Table of Contents

Advertisement

Unity 4600 User's Manual
FORCERF port
port:Either OFF or the numbers 1, 2, 3, or 4.
Command to either disable or enable effective RF switch bypassing. If port is a
number, then all subsequent carrier reception is sought at that RF feed port,
regardless of the current Unit Setting. If port is OFF, then normal RF switch
function is restored. Entering the command without parameters gives current
status, either "Normal RF Switch", or "Forced RF Feed Port n" where n is
either 1, 2, 3, or 4. A Local Control Command (available from the terminal
regardless of "Local Control Enable/Disable" commands from the network).
GHOSTLIST action PID
action: 'A' for add or 'D for delete.
PID: hex number between 1 and 1ffe (except 11, reserved for SDT).
Command to add or delete entries in the list of ghost PIDs to pass to the ASI
transport output (while Program Mapping is enabled). Entering command
without the action or pid parameter dumps the current list.
H [command]
command: Any of the terminal command names (PC, R, PORT, etc.).
If an 'H' or any invalid command beginning with an 'H' is entered and com-
mand is omitted, the whole help screen will be displayed, consisting of a list of
all currently available commands and a brief description of each listing. If an
'H' or any invalid command beginning with an 'H' is entered and command is a
valid User Command Name, then detailed help for command is displayed. A
Local Control Command (available from the terminal regardless of "Local
Control Enable/Disable" commands from the network).
INDPERS indication time
indication:"A" (for "Alarm") or "W" (for "Warning").
time:Time in seconds.
Command to set the minimum indication-time persistence for either Alarms or
Warnings, per the value of indication, for the time period given by time. Enter-
ing command without parameters shows the current settings. A Local Control
Command (available from the terminal regardless of "Local Control Enable/
Disable" commands from the network).
800032-01 Rev. C
50
wegener.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unity 4600

Table of Contents