Table of Contents
Advertisement
Unit Status/History
Allows user to access unit status and diagnostics. Typical items located
under this menu include:
1. Current unit state
2. Signal Quality
3. Last commanded and last successful unit settings
4. Program Analysis
5. Local audio/video decompression history
6. Network control status/history
7. Current LAN settings
8. Unit internal temperature
9. Option module presence/status
10. Unit information screen (including software version)
11. Control to clear diagnostics
Unit Setup
Allows user to control unit. Typical controls located under this menu
include:
1. Set permanent unit settings (tuning, program, audio selection)
2. Add/edit/move/delete Presets
3. NTSC Pedestal
4. Buffer control (PCR offset)
5. Audio attenuation
6. Audio front-panel monitor select
7. Muting
8. VBI line re-insertion enable
9. Recovery mode timeouts
10. Serial port setup
11. LNB LO frequency set
12. LNB DC power set
13. User cue relays
14. Signal quality indicator thresholds
15. Minimum alarm/warning indication times
16. LAN settings
17. NVRAM operations
18. Alarm (history) latching enable
19. Program Mapping Ghost PID pass list
20. Current unit software selection
21. Unit label edit
22. Unit reset
wegener.com
Unity 4600 User's Manual
41
800032-01 Rev. C
Advertisement
Table of Contents
