Wegener 4600 User's Reference Manual page 58

Unity 4600 User's Manual
RD group
group: Indicates group of status/diagnostic information to report, as follows:
Expanded U4600 report on unit volatile diagnostic and status information. A
Local Control Command (available from the terminal regardless of "Local
Control Enable/Disable" commands from the network).
RP group
group: Indicates group of parameters to report, as follows:
800032-01 Rev. C
AUD - Audio service diagnostics
AW - Alarm/Warning status
CA - Conditional Access diagnostics
DPI - Conditional Digital Program Insertion (DPI)
GL - Genlock system (if installed and applicable)
LAN - IP/Ethernet diagnostics
NTW -
COMPEL
PRGMP - Program mapping at ASI output
MSC - Miscellaneous diagnostics
REC - Automated Recovery status
RF - Carrier Acquisition/Tracking diagnostics
RPA - Return Path diagnostics
SW - Software download/self-test status
TS - Transport Stream diagnostics
VID - Video service diagnostics
AUD - Audio services
AW - Alarm/Warning indications
CA - Conditional Access
DPI - Conditional Digital Program Insertion (DPI)
LAN - Ethernet/IP LAN
NTW -
COMPEL
®
network control diagnostics
®
network control
58 wegener.com